Modular Tool Mat for Snap-on Classic Toolboxes
Build a drawer layout around your tools with the Automotive Accessories NA Modular Tool Mat. Designed for compatible Snap-on Classic drawers, this interlocking system provides the base for a customizable toolbox drawer organizer. Add magnetic screwdriver attachments, choose their positions, and give each screwdriver a designated place.
Whether you work on vehicles every day or spend weekends in the garage, an organized drawer makes it easier to find the screwdriver you need—and see where it belongs when the job is done.
Screwdriver organizer attachments are required to hold your screwdrivers and are sold separately. The mat itself is not magnetic.
Tool Box Mats That Fit Your Drawer
Made from durable PETG plastic, these tool box mats connect to create a fitted grid inside your drawer. Choose from three sizes designed for Snap-on Classic toolboxes:
| Drawer size | Width × length |
|---|---|
| Small | 14.6″ (370.8mm) × 21.9″ (556mm) |
| Medium | 30.5″ (775mm) × 21.9″ (556mm) |
| Large | 49.1″ (1248mm) × 21.9″ (556mm) |
Measure your drawer’s interior and compare it with these dimensions before ordering. These mats are designed for the specified Snap-on Classic drawers; we’ll be continuously expanding our toolbox compatibilities in the future.
A Toolbox Organizer You Can Rearrange
Your tool collection changes. Your organizer should be able to change with it.
The grid lets you clip compatible holders into the positions you choose. Adjust the spacing for your screwdrivers, rearrange a section, or add more holders as your collection grows.
If you’re upgrading from a basic tool box drawer liner, this system adds attachment points for organizing your tools. It gives you a tool drawer organizer with a layout you can revise without cutting new foam shapes whenever you move a screwdriver.
Magnetic Holders, Modular Tool Mat
Is this a magnetic tool mat? The magnetic holding power comes from the screwdriver attachments, not the mat. Each holder clips into the grid and uses neodymium magnets to help retain your screwdrivers.
Complete your setup with the sizes you need:
- Small screwdriver organizer attachments: Each holds two small screwdrivers. A 12-pack holds up to 24.
- Medium screwdriver organizer attachments: Each holds two medium screwdrivers. A 12-pack holds up to 24.
- Large screwdriver organizer attachments: Each holds one large screwdriver. A six-pack holds up to six.
Small and medium holders arrange screwdrivers in alternating directions to make efficient use of drawer space. Mix attachment sizes to build a tool chest organizer around your screwdriver collection.
Set Up Your Drawer in Three Steps
- Connect the mat sections. Follow the directional arrows to position the centre, edge, and corner pieces.
- Clip in your attachments. Arrange the screwdriver holders where you want them.
- Add your screwdrivers. Check the spacing and reposition holders as needed.
Choose your tool mat size, add compatible screwdriver attachments, and create a drawer where every screwdriver has its place. We also have a toolbox mat compatibility calculator you can use to check if our mats are compatible with your toolbox.
Automotive Accessories NA is not affiliated with, endorsed by, or sponsored by Snap-on Incorporated. Snap-on is a registered trademark of Snap-on Incorporated.
Awesome design! Allows for adjustments as my tool inventory changes!